2025 Generac Power Systems Diesel Mobile Generator | 20kVA / 16kW MLG20IF4

Information

2025 Generac Power Systems Diesel Mobile Generator | 20kVA / 16kW MLG20IF4

Features may include:

Affordable, Reliable, Mobile Power
  • The MLG20IF4 diesel generator provides affordable, single phase power with just the right combination of hardworking output and efficiency.
Tier 4 EPA Approved Engine
  • Generac Mobile recognizes environmental responsibility and continues to meet emission regulations with the addition of their Interim & Tier 4 Generator line. The MLG15M generator is powered by a Mitsubishi diesel engine. Proven power you can trust, while maximizing fuel efficiency and high performance.
Tough
  • Full tubular steel frame, with lockable enclosure
  • Durable, fade resistant, white baked on powder coat finish
  • Stainless steel hinges, exterior hardware and pad lockable door latches
Proven Reliability
  • CSA Certified
  • Key switch to preheat (glow plug), start & stop
  • Automatic low oil level / high temp shutdown alerts
  • 70A Start limit main breaker
  • 2 year - 2,000 hour warranty
  • Marathon voltage regulation within +/- 1%

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2025
  • Generac Power Systems
  • Diesel Mobile Generator | 20kVA / 16kW MLG20IF4
  • Model: 4LE2TAG
  • Ultra-Low Sulfur Diesel
  • Available

Specifications

  • 2025
  • Generac Power Systems
  • Diesel Mobile Generator | 20kVA / 16kW
  • MLG20IF4
  • General
  • Model: 4LE2TAG
  • Isuzu
  • EPA Compliance: Tier IV Final
  • 4
  • Inline
  • 133 in3 (2.2L L)
  • 3.35 in (85 mm)
  • 3.78 in (96 mm)
  • TBD
  • Turbocharged
  • Water Jacket
  • Ultra-Low Sulfur Diesel
  • Electric | Frequency Regulation (Steady State): 5%
  • 1,800 RPM
  • Size: 440 CCA
  • 60A
  • System Voltage: 12 VDC | Ground Polarity: Negative (-) | Voltage Regulator Type: AVR | Regulation Accuracy (Steady State): ± 1%
  • Model: Marathon Electric 334CSA3028 | Poles: 4 | Field Type: Rotating | Insulation Class Rotor/Stator: H | Total Harmonic Distortion: <5% | Standard Excitation: Brushless | Bearings: Single Bearing, Double Shielded
  • Type: Spin On
  • Oil: Gear | Water: Belt Driven | Fuel: Gear
  • Fuel Supply/Return Line Diameter: 0.313 in (7.9 mm)
  • 20.0 in (508 mm)
  • Fan Type: Blower | Injector Type: Direct
  • 12.0 qt (11.3 L)