2024 Toro Turf Pro 300/500 Series 30923

Information

2024 Toro Turf Pro 300/500 Series 30923

Turf Pro 300Overview

From performance and cost savings to more time to focus on the bottom line, the Toro Turf Pro puts innovation and efficiency at your command. With GPS RTK technology, the Turf Pro navigates with a 0.75– 1.25" (2–3 cm) level precision, enabling it to mow a consistent pattern with a minimal overlap. The mobile app allows you to remotely control your robot or fleet of robots. Start or stop your machines at any time from anywhere, receive alerts and automate certain processes.

Features may include:

Excellent Cutting Performance
  • Daily mowing always provides a fresh cut and perfect lawn. Mow up to 11.1 acres (45,000 m2)
Ultra Precise Navigation
  • GPS-RTK navigation provides ultra precise navigation - no boudary wires required.
All-Electric, Self-Charging
  • The all-electric, autonomous mower is self charging and automatically returns to it's charging station.
Fleet Management
  • Wireless monitoring and control of your units through computer or mobile phone.
Customize Settings
  • Customize settings at your fingertips—working perimeters, no-go zones, mowing pattern, cutting height, transport paths, etc.

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Toro
  • Turf Pro 300/500 Series 30923
  • Available
  • Mowing / Picking: 25 in / 63.3 cm
  • Maximum Cut (Standard Disc / Low Height Disc): 3.9 in / 3.5 in / 100 mm / 90 mm | Minimum Cut (Standard Disc / Low Height Disc): 0.75 in / 0.60 in / 20 mm / 15mm

Specifications

  • 2024
  • Toro
  • Turf Pro 300/500 Series
  • 30923
  • Robotic
  • Run Time: 280 min
  • 90 min
  • 19.2Ah
  • Energy: 491.5Wh | Nominal Voltage: 25.6V
  • Mowing/Working: Up to 1.7 mph / 2.8 km/h
  • 23°F to 140°F (-5°C to 60°C)
  • 52 dB
  • 39.4 in. x 41.1 in. x 18.3 in. (100.2 cm x 104.4 cm x 46.6 cm) | Maximum Working Area: 11 acres / 45,000 m2 | Recommended Working Area: 8.6 acres / 35,000 m2
  • Maximum Cut (Standard Disc / Low Height Disc): 3.9 in / 3.5 in / 100 mm / 90 mm | Minimum Cut (Standard Disc / Low Height Disc): 0.75 in / 0.60 in / 20 mm / 15mm
  • Mowing / Picking: 25 in / 63.3 cm
  • 187.4 lbs / 85 kg
  • Front Lift Sensors: 2 | GPS Location: RTK | Maximum Slope: 35% / 19.5º | Number of Cutting Blades: 9 | Number of Cutting Heads: 3 | Rear Collision Sensors: 2 | Rear Lift Sensors: 2 | Resistive Bumper For Collision Detection: 1 | Roll Over / Tilt Sensor: 1 | Sonars For Obstacle Detection: 5
  • Electronic | Deflectors: 2