2024 Toro Reelmaster® 3550 Series 3910

Information

2024 Toro Reelmaster® 3550 Series 3910

The Toro® Reelmaster® 3550-D floats effortlessly over contours in fairways and green surrounds. With a productive 82" (2.1m) cutting width, turf-friendly tires, the superior traction of a Series/Parallel 3-wheel drive system, and a weight of less than 2,000 pounds, the Reelmaster® 3550-D is engineered to make a big impression...without leaving one.

Features may include:

Quiet Operation
  • The Reelmaster 3550-D has a quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.
Enhanced Ground Following
  • 18" (45.7 cm) version of fairway DPA cutting units to better handle fairway undulations. 22" (55.9 cm) rear cutting units can be installed to achieve additional overlap if desired.
Powerful Engine
  • Powered by a 24.8 hp (18.5 kW) Kubota diesel engine, the Reelmaster® 3550-D provides plenty of power to climb hills, even while running groomers and rear roller brushes.
Superior Traction
  • The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times. The result is impressive traction in hilly and wet conditions, and minimal wheel slip so it's gentle on the turf.
Smooth Turf Friendly Tire
  • Smooth turf tires are standard to minimize turf damage.

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Toro
  • Reelmaster® 3550 Series 3910
  • Kubota® liquid-cooled diesel engine
  • Diesel
  • Available
  • Transport: 91" (231 cm)
  • 74" (188 cm) | of Cut Range: 8-Blade: 0.5" - 1.5" (13 mm - 38 mm) 11-Blade: 0.25" - 0.75” (6 mm -19 mm)

Specifications

  • 2024
  • Toro
  • Reelmaster® 3550 Series
  • 3910
  • Riding
  • Kubota® liquid-cooled diesel engine
  • Liquid Cooled
  • 24.8 hp (18.5 kW) @ 3000 RPM
  • 3-cylinder
  • @ 2200 RPM
  • 68.5 cu.in. (1123 cc)
  • Diesel
  • Diesel | Traction Drive: 3WD
  • Power steering with tilt steering wheel.
  • Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse.
  • Hydrostatic service brake. Hand-operated parking brake.
  • 12V
  • Frequency/Backlapping: 5" reel 2,350 (+/- 150) rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping. | Cutting Unit Lift/Lower: Hydraulic - front and rear cutting unit lift/lower are sequenced for uniform starting and ending points. | System: Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.
  • 22" x 12" - 12", 4-ply, No Tread
  • 22" x 12" - 12", 4-ply, No Tread
  • Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Ground Speed - Reverse: 0 - 3.5 mph (0 - 5.6 km/h) | Mowing Speed: 0 - 7 mph (0 - 11.3 km/h)
  • Formed steel, welded steel and steel tubing.
  • Reel Diameter: 5 in. (12.7cm)
  • Product: 110" (279.4 cm)
  • 74" (188 cm) | of Cut Range: 8-Blade: 0.5" - 1.5" (13 mm - 38 mm) 11-Blade: 0.25" - 0.75” (6 mm -19 mm)
  • Transport: 91" (231 cm)
  • 82" (208 cm)
  • 7.5 U.S. gal. (28.4 L)
  • 1,985 lbs. (900.38 kg) with (5) 18" 8-blade cutting units.
  • Bedknife: Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment. | Blade Style/Type: Reel | Number of Blades: 11, 8
  • Cutting Unit Type/Configuration: Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.
  • Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).