2024 Toro Turf Pro 300/500 Series 30923
- Year 2024
- Make Toro
- Model Turf Pro 300/500 Series
2024 Toro Turf Pro 300/500 Series 30923
2024 Toro Turf Pro 300/500 Series 30923
Turf Pro 300OverviewFrom performance and cost savings to more time to focus on the bottom line, the Toro Turf Pro puts innovation and efficiency at your command. With GPS RTK technology, the Turf Pro navigates with a 0.75– 1.25" (2–3 cm) level precision, enabling it to mow a consistent pattern with a minimal overlap. The mobile app allows you to remotely control your robot or fleet of robots. Start or stop your machines at any time from anywhere, receive alerts and automate certain processes.
Features may include:
Excellent Cutting Performance- Daily mowing always provides a fresh cut and perfect lawn. Mow up to 11.1 acres (45,000 m2)
- GPS-RTK navigation provides ultra precise navigation - no boudary wires required.
- The all-electric, autonomous mower is self charging and automatically returns to it's charging station.
- Wireless monitoring and control of your units through computer or mobile phone.
- Customize settings at your fingertips—working perimeters, no-go zones, mowing pattern, cutting height, transport paths, etc.
Battery
Battery
Run Time: 280 min
Battery Charging Time
90 min
Battery Capacity, Nominal
19.2Ah
Electric
Electrical
Energy: 491.5Wh | Nominal Voltage: 25.6V
Operational
Operating Speed
Mowing/Working: Up to 1.7 mph / 2.8 km/h
Operating Temperature, Maximum
23°F to 140°F (-5°C to 60°C)
Performance
Noise Level
52 dB
Dimensions
Dimensions
39.4 in. x 41.1 in. x 18.3 in. (100.2 cm x 104.4 cm x 46.6 cm) | Maximum Working Area: 11 acres / 45,000 m2 | Recommended Working Area: 8.6 acres / 35,000 m2
Height
Maximum Cut (Standard Disc / Low Height Disc): 3.9 in / 3.5 in / 100 mm / 90 mm | Minimum Cut (Standard Disc / Low Height Disc): 0.75 in / 0.60 in / 20 mm / 15mm
Width
Mowing / Picking: 25 in / 63.3 cm
Weights
Weight
187.4 lbs / 85 kg
Features
Cutting Head
Electronic | Deflectors: 2
Features
Front Lift Sensors: 2 | GPS Location: RTK | Maximum Slope: 35% / 19.5º | Number of Cutting Blades: 9 | Number of Cutting Heads: 3 | Rear Collision Sensors: 2 | Rear Lift Sensors: 2 | Resistive Bumper For Collision Detection: 1 | Roll Over / Tilt Sensor: 1 | Sonars For Obstacle Detection: 5