2024 Generac Power Systems Gaseous Industrial Generator, 250kW SG250

Information

2024 Generac Power Systems Gaseous Industrial Generator, 250kW SG250

250kW Gaseous Generator

Keep all your business’s essentials up and running with a Generac 250kW generator. These gas generators are powered by a reliable underground pipeline network that is rarely impacted by weather-related events. Everything can continue to operate effortlessly until power is restored. All of our industrial gas generators are completely cost effective and give you the best value for the output so you can afford more of what you need for your business.

Features may include:

Generator Enclosure
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
Spark-Ignited Engine
  • Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
Industrial Alternator
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERZONE™ PRO SYNC Controller
  • First to market with built in Wi-Fi, Bluetooth and LAN connections - monitoring and control is always at your fingertips via a mobile connected device - cell phone, tablet or PC.
Generator Paralleling
  • Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Generac Power Systems
  • Gaseous Industrial Generator, 250kW SG250
  • Piston Type: Aluminum | Crankshaft Type: Ductile Iron | Lifter Type: Solid
  • Natural Gas
  • Available

Specifications

  • 2024
  • Generac Power Systems
  • Gaseous Industrial Generator, 250kW
  • SG250
  • General
  • Piston Type: Aluminum | Crankshaft Type: Ductile Iron | Lifter Type: Solid
  • Generac
  • 6 | Cylinder Head: Cast Iron | Cylinder Liners: Ductile Iron
  • In-line | Intake Air Method: Turbocharged/Aftercooled
  • 864.71 in3 (14.2 L)
  • 5.31 in (135 mm)
  • 6.50 in (165 mm)
  • 9.5:1
  • Electronic
  • Oil Pump Type: Gear | Oil Filter Type: Full-Flow Cartridge
  • Type : Pressurized Closed Recovery | Fan Type: Pusher
  • Natural Gas
  • Electronic | Frequency Regulation (Steady State): ±0.25%
  • Size: See Battery Index 0161970SBY | Voltage: 24 VDC | Ground Polarity: Negative
  • Alternator: 57.5 A
  • System Voltage: 24 VDC
  • Model: K0250124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%
  • Cooling: 1,894 RPM
  • Operating Fuel Pressure: 7-11 in H2O (1.7- 2.7 kPa)
  • 30 in (762 mm)
  • Crankcase Capacity: 36.2 qt (34.3 L)
  • Number of Main Bearings: 7 | Connecting Rods: Steel Alloy | Hardened Valve Seats: High Temp Steel Alloy
  • Intake Valve Material: Special Heat-Resistant Steel | Exhaust Valve Material: High Temp Steel Alloy
  • Down Draft