2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

Information

2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

150kW Gaseous Generator (9.0L)

As electrical grid outages become more common it is important to be prepared for the potential of a power outage. Keep all your business’s essentials up and running with Generac's 9.0L 150kW generator. Our rugged natural gas generators give you all the backup power you need until grid power is restored. All of our industrial gas generators are completely cost effective and give you the best value for the output so you can afford more of what you need for your business.

Features may include:

Generator Enclosure
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
Spark-Ignited Engine
  • Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
Industrial Alternator
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® Controller
  • Generac engineers its generator controls with safety and convenience as top priorities.
Generator Paralleling
  • Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Generac Power Systems
  • Gaseous Industrial Generator, 150kW MG150_9_0
  • Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Lifter Type: Hydraulic Roller
  • Natural Gas, Propane Vapor/Liquid
  • Available

Specifications

  • 2024
  • Generac Power Systems
  • Gaseous Industrial Generator, 150kW
  • MG150_9_0
  • General
  • Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Lifter Type: Hydraulic Roller
  • Generac
  • 8 | Cylinder Head: Cast Iron
  • V | Intake Air Method: Naturally Aspirated and Turbocharged
  • 543 in3 (8.9 L)
  • 4.49 in (114.3 mm)
  • 4.25 in (107.95 mm)
  • 10.5:1
  • High Energy
  • Oil Pump Type: Gear Driven | Oil Filter Type: Full-Flow Spin-On Cartridge
  • Type : Pressurized Closed | Fan Type: Pusher
  • Natural Gas, Propane Vapor/Liquid
  • Electronic | Frequency Regulation (Steady State): ±0.25%
  • Size: See Battery Index 0161970SBY | Voltage: 12 VDC | Ground Polarity: Negative
  • System Voltage: 12 VDC
  • Model: K0150124Y26 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Single Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%
  • Cooling: 2,386 RPM
  • Operating Fuel Pressure NG/LPV: 7-11 in H2O (1.7- 2.7 kPa)
  • 22 in (558.8 mm)
  • Crankcase Capacity: 8.5 qt (8.0 L)
  • Number of Main Bearings: 5 | Connecting Rods: Forged Steel
  • Intake Valve Material: Steel Alloy | Exhaust Valve Material: Stainless Steel
  • Down Draft