2024 Exmark Navigator NVS740CKC42000

Information

2024 Exmark Navigator NVS740CKC42000

A lawn maintained with the professional-grade Exmark Navigator 42-inch or 48-inch zero-turn mower may be as close as it gets to perfection. That’s thanks to its patented fill-reduction. The Navigator generates more airflow for better vacuuming and debris collection combined with a larger diameter blower. Our professional 48-inch zero turn mower and 42-inch zero turn mower are perfect for any landscape professional who wants more controllability, responsiveness, and less hand force. Another Navigator signature trait is the higher blade tip speed for slicing grass into finer particles. Its center-discharge deck is designed with two-sided trimming that lets the operator accurately control discharge, keeping flower beds and walkways clipping-free. And the Navigator does all this at speeds up to 7 mph. So, you can Navigate a virtually perfect lawn in no time. Are you looking to add more professional-grade equipment to your fleet?

Features may include:
  • More Capacity, More Productivity
  • Fill Reduction
  • Heavy Duty Gear Box
  • Blower Size
  • Easy to Maintain
  • “FeatherTouch” Controls
  • Deck Depth
  • Engine Orientation

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Exmark
  • Navigator NVS740CKC42000
  • Model: CH740 | Series: Command™ | Engine Spec: 3182
  • Gas Carbureted | Indicator: Translucent Visual
  • Available
  • 43.2 in. (109.7 cm)
  • Cutting: 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments . | 51.2 in. (130.0 cm)

Specifications

  • 2024
  • Exmark
  • Navigator
  • NVS740CKC42000
  • Zero-Turn Mower
  • Model: CH740 | Series: Command™ | Engine Spec: 3182
  • Heavy-duty canister air filtration
  • 725
  • Kohler
  • 3,600 rpm
  • Gas Carbureted | Indicator: Translucent Visual
  • Engagement: Lever-actuated clutching belt with 6" brake band.
  • FeatherTouch hand-control drive levers, low-force constant speed lever.
  • Hydro-Drive | Description: New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors.
  • Wet disc, internal in wheel motor.
  • 18 x 10.5-10 Multi-Trac® C/S.
  • 18 x 10.5-10 Multi-Trac® C/S.
  • 8 x 3.0-4 semi-pneumatic.
  • 12 volt battery with 15-amp alternator
  • Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse. | Blade Tip Approximately: 18,500 fpm.
  • Tractor: Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs.
  • 42"
  • Cutting: 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments . | 51.2 in. (130.0 cm)
  • Blades at: 22" | 91.8 in. (233.2 cm)
  • 43.2 in. (109.7 cm)
  • 1173 lbs
  • 7.5-gallon (28.4-L), pivoting tank for easier engine service.
  • Bag: 9.5 bushel (76 gallons)
  • Caster Forks: 0.50" thick rear caster fork | UPC: 193308000282 | Carb Compliant | Deck Lift: Deck latch for easier height of cut adjustment | Safety Package: Operator Presence Controls (OPC) and drive system interlock. | Drive Wheel Release: Allows movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly.
  • Heavy Duty cast iron right-angle gearboxes.
  • Commercial grade high back contoured foam padded with hinged mounting.
  • 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.