2024 Exmark Lazer Z S-Series LZS801CKA72RA1
- Year 2024
- Make Exmark
- Model Lazer Z S-Series
- Engine Model: FX801V | Series: V-Twin | Spec: _S04
2024 Exmark Lazer Z S-Series LZS801CKA72RA1
2024 Exmark Lazer Z S-Series LZS801CKA72RA1
With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features may include:- Less Time At The Pump
- On-Board Diagnostics
- Ultracut Series 4 Deck
- Built to Last
- Fewer Grease Points
- Tool-less Belt Removal
Engine
Air Filter
Heavy-duty canister air filtration system
Displacement
852
Engine Manufacturer
Kawasaki
Engine
Model: FX801V | Series: V-Twin | Spec: _S04
Rated Engine Speed
3,750 RPM
Fuel System
Fuel Type
Gas Carbureted
Fuel System
Fuel Indicator: Electronic Sender
PTO
PTO Type
Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
Drivetrain
Drivetrain
Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Steering
Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Brakes
Parking Brake
Lever-actuated disc brake.
Wheels & Tires
Tires, Front Specification
24 x 12.0-12, 4-ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
Tires, Rear Specification
24 x 12.0-12, 4-ply Turf Master®
Electric
Electrical
12-volt battery with 15-amp alternator.
Operational
Operating Speed
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Top Speed
Blade: Approximately 18,500 fpm.
Chassis
Frame Type
Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Lights and Safety
Safety Features
Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Dimensions
Spindle Diameter
Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
Cutting Width
Deck: 72"
Height
Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
Length
Blades: 3 Blades at 24.50" | 86.1 in. (218.7 cm)
Width
78.2 in. (198.6 cm)
Dimensions
Casters: .50" thick caster yoke arms.
Capacities
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Weights
Weight
Curb: 1359 lbs
Features
Features
Smart Controller | Engine hour meter and cup holder | UPC: 193308119717 | Carb Compliant | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Seat Type
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Construction Material, Deck
7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.