2024 Exmark Lazer Z Diesel LZS80TDYM724W0

Information

2024 Exmark Lazer Z Diesel LZS80TDYM724W0

When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.

Features may include:
  • Improved Handling
  • Fuel Capacity
  • Tire Size / Ground Speed
  • On-Board Intelligence
  • Reduced Maintenance and Service
  • Hydraulic Deck Lift
  • Productivity
  • Leading Zero-Turn. Strong Warranty.

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Exmark
  • Lazer Z Diesel LZS80TDYM724W0
  • Model: 3TNV80FT | Series: TNV | Spec: ZMTR1
  • Electronically Governed IDI Turbo Diesel | Diesel
  • Available
  • 84.9 in. (215.6 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 71.8 in. (182.4 cm)

Specifications

  • 2024
  • Exmark
  • Lazer Z Diesel
  • LZS80TDYM724W0
  • Zero-Turn Mower
  • Model: 3TNV80FT | Series: TNV | Spec: ZMTR1
  • Heavy-duty canister air filtration system with electronic vacuum sensor
  • 1267
  • Yanmar
  • 2,600 RPM
  • Electronically Governed IDI Turbo Diesel | Diesel
  • Engagement: Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
  • Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
  • Hydro-Drive | Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler. | Drive Wheel Release: Allows unit movement without engine running.
  • Lever-actuated internal wet disc brake.
  • 26x12-12, 6ply
  • 26x12-12, 6ply
  • 15 x 6.0-6, smooth-tread, semi-pneumatic.
  • 12-volt battery with 55-amp alternator.
  • Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse. | Blade Tip Speed: Approximately 18,500 fpm
  • Tractor Frame: Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
  • 72"
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 71.8 in. (182.4 cm)
  • 3 Blades at: 24.50" | 99.6 in. (253.0 cm)
  • 84.9 in. (215.6 cm)
  • 1930 lbs
  • 12-gallon (45.4-L), side fuel tanks
  • Caster Forks: .50" thick caster yoke arms. | Onboard Intelligence: RED Technology | 12-volt plug-in, engine hour meter and cup holder | UPC: 193308000787 | Fuel Indicator: Yes - mechanical float type | Carb Compliant: Yes | Deck Lift: Hydraulic | Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings top and bottom, and splined blade driver.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.