2024 Exmark Turf Tracer S-Series TTS600GKA523E0

Information

2024 Exmark Turf Tracer S-Series TTS600GKA523E0

With the Exmark Turf Tracer S-Series commercial walk-behind mower, you can choose from a variety of rugged engines. Then, match that power to cutting decks in 36-, 48-, and 52-inch widths. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.

Features may include:
  • New Electric Clutch
  • Hour Meter Comes Standard
  • Floating Deck
  • Forget Flats
  • Patented Enhanced Control System (ECS)

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Exmark
  • Turf Tracer S-Series TTS600GKA523E0
  • Model: FS600V | Series: V-Twin | Spec: _S27
  • Gas Carbureted
  • Available
  • 64.3 in. (163.3 cm)
  • Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 42.0 in. (106.7 cm)

Specifications

  • 2024
  • Exmark
  • Turf Tracer S-Series
  • TTS600GKA523E0
  • Walking
  • Model: FS600V | Series: V-Twin | Spec: _S27
  • Standard Engine Manufacturer's air filter
  • 603
  • Kawasaki
  • 3,600 rpm
  • Carbureted
  • Gas Carbureted
  • Engagement: Electromagnetic 105 ft-lbs clutch.
  • Hydro-Drive | Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. | Drive Wheel Release: Allows unit movement without engine running.
  • Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
  • Lever-actuated mechanical compression.
  • 9 x 3.5-4, smooth-tread, semi-pneumatic. | 16 x 7.5-8, 4-ply Turf Master®
  • 12-volt battery with 15-amp alternator.
  • Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
  • Blade Tip Approximately: 18,500 fpm.
  • 52"
  • Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 42.0 in. (106.7 cm)
  • 3 Blades at: 18.00" | 75.9 in. (192.8 cm)
  • 64.3 in. (163.3 cm)
  • 5-gallon (18.9-L) fuel tank.
  • Curb: 690 lbs
  • Caster Forks: .38" thick caster yoke arms | Safety Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Engine hour meter | UPC: 193308000114 | Deck Lift: Manual lift with hairpin from hole to hole for position adjustment. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
  • Blade: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.