2024 Exmark Staris E-Series STE600CKA323H1

Information

2024 Exmark Staris E-Series STE600CKA323H1

Available with a choice of 32- or 36-inch UltraCut Series 3 cutting decks, Staris E-Series commercial stand-on mower strike the perfect balance of productivity and value. The compact size of the 32-inch model allows it to fit through 36-inch gates and into tight spaces - a must for commercial mowing. A top ground speed of 7.5 mph enables landscape pros to mow more properties, more quickly, without the fatigue typically experienced with a small walk-behind mower. A large, open operator platform allows for easy step-on step-off. Constructed from heavy-duty tubular steel, Staris frames feature the same wall thickness as our industry-standard Lazer Z zero-turn riders. Proven Kawasaki V-twin commercial engines feature cast-iron cylinder liners, pressurized lubrication and a rotating grass chopper screen to minimize debris in the cooling system.

Features may include:
  • Cut Quality
  • Drive System
  • Serviceability
  • Commercial-Grade Engine
  • Compact Design

Photos

Highlights

  • Mansfield, Pennsylvania
  • 2024
  • Exmark
  • Staris E-Series STE600CKA323H1
  • Model: FS600V | Series: V-Twin | Spec: _S36
  • Gas Carbureted
  • Available
  • 44.9"
  • Cutting: 1.0" (2.54 cm) to 4.5" (11.4 cm) in 0.25" (.64 cm) increments | 47.3"

Specifications

  • 2024
  • Exmark
  • Staris E-Series
  • STE600CKA323H1
  • Stand-On
  • Model: FS600V | Series: V-Twin | Spec: _S36
  • Standard Engine Manufacturer's air filter
  • 603
  • Kawasaki
  • 3,600 rpm
  • Carbureted | Indicator Yes - Float Gauge
  • Gas Carbureted
  • Engagement: Warner 105 ft-lb clutch
  • Hydro-Drive | Description: Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. | Drive Wheel Release: Allows unit movement without engine running.
  • Twin levers with adjustable front reference bar to modify forward ground speed.
  • Lever-actuated bar brake.
  • 9 x 4.50-5, smooth-tread, semipneumatic tires with sealed ball bearings. | 21x7.00-10 Kenda K505
  • 12-volt battery with 15-amp alternator.
  • Infinitely variable speed selection 0–7.5 mph (12.1 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
  • Blade: Approximately 18,500 fpm.
  • Tractor: Welded, heavy-duty 1.5" x 3" tubular steel.
  • 32"
  • Cutting: 1.0" (2.54 cm) to 4.5" (11.4 cm) in 0.25" (.64 cm) increments | 47.3"
  • 2 Blades at: 16.25" | 58.103"
  • 44.9"
  • 5-gallon (18.9-L), single fuel tank with single fill location.
  • Curb: 702 lbs
  • Caster Forks: .38 thick caster yoke arms with sealed ball bearings | Engine Hour Meter | UPC: 193308215563 | Operator Presence Controls (OPC) with safety interlock system indicators | Deck Lift: Single point HOC | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 3. Side discharge standard, with flexible discharge chute and option to bag or mulch.
  • No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
  • 7-gauge top that is formed and continuously seam welded, 7-gauge side skirt