2024 Exmark Quest V-Series QZV060B0242H00
- Year 2024
- Make Exmark
- Model Quest V-Series
- Engine Spec: 3099 | Series: 7000 Series
2024 Exmark Quest V-Series QZV060B0242H00
2024 Exmark Quest V-Series QZV060B0242H00
The low center of gravity design, large drive and caster tires and comfortable operator seat keep you comfortably in control, with increased legroom for the operator. A standard deck step eases mounting and dismounting of the Quest V-Series. Maintenance is minimized with the electric powertrain, integrated hydro transmissions and just two annual grease points.
Features may include:- 10-Amp Flex-Force Power System
- Lower Noise Output
- Onboard Intelligence
- 60V 6-Pod Charger
Engine
Engine
Spec: 3099 | Series: 7000 Series
Displacement
735
Rated Engine Speed
3,600 rpm
Air Filter
Standard Engine Manufacturer's air filter
Fuel System
Fuel System
Fuel Indicator: Translucent Visual | Carbureted
Fuel Type
Gas Carbureted
PTO
PTO Type
Engagement: Electromagnetic 105-ft-lb clutch
Drivetrain
Drivetrain
Hydro-Drive | Description: Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Steering
Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Brakes
Parking Brake
Lever-actuated pawl brake.
Wheels & Tires
Tires, Front Specification
22 x 11-10 K3012 | Caster: 13 x 6.5-5 smooth-tread, pneumatic.
Tires, Rear Specification
22 x 11-10 K3012
Electric
Electrical
12 volt battery with 15-amp alternator
Operational
Operating Speed
Forward: 0–8.0 mph (12.9 kmph) | Reverse:0–5.0 mph (8.0 kmph)
Top Speed
Blade: Approximately 18,500 fpm.
Chassis
Frame Type
Tractor: Unibody, riveted 10-guage steel.
Lights and Safety
Safety Features
Package: Operator Presence Controls (OPC) and drive system interlock.
Dimensions
Spindle Diameter
Blade Cutter Housing: 7.30" | Blade Shaft: 17mm (.67")
Dimensions
Casters: .375" thick caster yoke arms.
Cutting Width
Deck: 42"
Width
59.5 in. (151.0 cm)
Length
Blades: 3 Blades at 16.25" | 76.0 in. (193.0 cm)
Height
Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. | 47.6 in. (121.0 cm)
Capacities
Fuel Capacity
3-gallon (11.0-L), single fuel tank with single fill locations
Weights
Weight
Curb: 680
Features
Seat Type
Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
Construction Material, Deck
Style: Floating | Style Description: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.